Tools

The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.

This simple tool is designed to remove and install the static bearing in the shock ends of many modern rear shocks. Machined from durable stainless steel this compact tool allows the user to remove and install the DU bushings without resorting to hammers and punches. The coarse acme thread keeps the constant turning to a minimum.

The lever setter is a unique tool that works in conjunction with our HAG (or other hanger allignment tool) to set brake and shifter levers at the same height from side to side. The tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter. Use the HAG indicator to set levers the same from one side of the bar to the other. Once you're satisfied with your lever placement simply remove the tool and replace your headset top cap and go ride. Compatibility: Requires a star nut or compression plug with a M6x1 thread. Works with road and mountain shifters and brake levers. Compatible with most hanger alignment tools on the market. Recommendations: It's advised to use a spacer on top of the stem to help align the lever setter with the steer tube. This will reduce the impact the quality of the cut on the steer tube has on the function of the tool. The supplied threaded stud can be replaced with a longer one if needed.

The unique thing about our Saw Guide is that the clamp is open, so you can slide it around the steer tube instead of having to slide it over the end. It doesn't sound like that big of a deal but it means you can get an accurate and square cut without taking the fork off the bike and more importantly without taking all the cables out of the bike. Use this tool once for that application and it's paid for itself. Of course it will work on normal steer tubes as well and give you a nice square cut every time. The guide is two sided, one side for standard toothed metal cutting blades and the opposite side is wider for abrasive blades used to cut composites. You can also use the guide in a vise like you're probably use to and it's pretty compact if you want to travel with it. Compatible with 1" and 1.125" steer tubes Currently not compatible with cutting handlebars!

- High quality Kraftform Plus screwdrivers. - Multi-component Kraftform Plus handle - Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. - The tips are microscopically roughened for optimal bite to the screw. - "Take it easy" tool finder with color coding according to profiles and size stamp - The hexagonal anti-roll feature

- High quality Kraftform Plus screwdrivers. - Multi-component Kraftform Plus handle - Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. - Lasertips microscopically roughened for optimal bite to the screw. - ''Take it easy'' tool finder with color coding according to profiles and size stamp - The hexagonal anti-roll feature

- High quality Kraftform Plus screwdriver. - Multi-component Kraftform handle for fast and low-fatigue working. - Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. - Holding function - Anti-roll feature prevents any bothersome rolling away at the workplace. - Handle markings for simplified finding and sorting of the tool.

- High quality Kraftform Plus screwdriver. - Multi-component Kraftform handle for fast and low-fatigue working. - Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. - Holding function - Anti-roll feature prevents any bothersome rolling away at the workplace. - Handle markings for simplified finding and sorting of the tool.

- T-handle screwdriver: Shape to allow high torque transmission in difficult tightening and loosening situations. - The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. - The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. - Holding function (HF) to securely hold the TORX screw on the tool. - Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.

- T-handle screwdriver: Shape to allow high torque transmission in difficult tightening and loosening situations. - The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. - The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. - Holding function (HF) to securely hold the TORX screw on the tool. - Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.

- Smart mouth geometry significantly expands the range of uses in confined spaces. - Automatically find the respective placement point after every turn. - The slim yet robust ring side is angled by 15° to the tool axis. - The high-quality surface treatment achieves a high and long-lasting corrosion protection. - With Take it easy tool finder: color coding by size.

- Mini Ratchet compatible with 1/4'' square nuts - Hi torque capacity up to 65nm - Simple Left/Right Switchover - Fine tooth mechanism with 60 teeth - Small return angle of 6° for precise work - Ideal for working in confined spaces

- Tool shaft for nutsetters. - Output: 1/4 square head - Drive: 1/4" hexagon.

- Bit socket with 1/4 inch drive and holding function. - "Take it easy" Tool Finder with color coding according to size

- Bit socket with 3/8 inch drive and holding function. - "Take it easy" Tool Finder with color coding according to size

- Bit socket with 1/4 inch drive and holding function. - "Take it easy" Tool Finder with color coding according to size

- Bit socket with 3/8 inch drive and holding function. - "Take it easy" Tool Finder with color coding according to size

- Compatible for Manual and power tool socket insert (ISO 2725-Part 3) - "Take it easy" Tool Finder with color coding according to size - Featuring a good grip to allow easy pick-up even with oily hands. - Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome-plated.

- Wera Zyklop extension with easy-to-grip free-turning sleeve - Made out of high quality chrome vanadium steel, matt chrome-plated. - 1/4 drive 1/4 outcome

- Bicycle tool set - 14 pieces Includes: - Hex Screwdriver (2, 2.5mm) - T-Handle Hex-Plus with HF (3, 4, 5, 6, 8mm) - Torx Screwdriver (TX10) - Torx T-Handle with HF (TX20, TX25) - Flat Screwdriver (1.0x5.5x100mm and 1.2x7.0x125mm) - Phillips Screwdriver with lazertip (PH1, PH2) - Two Wall Rack

- Short compact Stubby shape for working in tight installation spaces with 7 Included bits - Ergonomic 2-component Kraftform handle for precise work - Stainless Steel Bits - Captive and swiveling bit magazine for easy removal and safe storage of bits - Take it easy tool finder: color coding according to profile and size Includes: - Stubby Kraftform screwdriver - Phillips (PH1) - Torx (TX10, TX25) - Hex-Plus (2.5, 3, 4, 5mm)

- Particularly suitable for narrow wrenching situations on the bike - Joker 6003 pedal specifique size 15mm with flat mouth to mount and dismount pedals - Special mouth geometry expands the placement possibilities of the tool - High-quality surface treatment achieves a high and long-lasting corrosion protection. - Low return angle in the mouth "takes" the screw every 15° Includes: - Joker 6003 size 6, 7, 8, 9 ,10, 11, 12, 13, 16, 17mm - Joker Pedal wrench 15mm - Joker pouch suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system

- Tire levers set made of glass fibre reinforced plastic - Safely lever the tires off of the rim without damaging the rim - 1/4" hexagon mounting in the tire lever allow the use of a 1/4" bit - With valve core tool and deflater

- 3/8'' Bit sockets for the most common TORX and Hex screws - Long bit sockets with extra slim, cylindrical profile zone for low-located couplings (e.g. for bottom bracket ball bearing or stem-fork-clamping) - With extra slim 30mm long profile area - With Take it easy tool finder: color coding by size - Knurling on lower socket end for more grip when used manually Includes: - Robust textile pouch - Torx (TX25, TX30) socket - Hex-Plus (4, 5, 6, 8, 10mm)

- 10-piece Zyklop Mini set - Mini ratchet suitable for direct mounting of 1/4" nuts - Drop-forged full steel design for torques exceeding 65 Nm - Fine-pitched ratchet mechanism and small return angle of 6º - Stainless Steel Bits Includes: - 8001 A bit Ratchet - Stainless (PH2) - Stainless (TX10, TX25) - Stainless Hex (2, 2.5, 3, 4, 5, 6mm)

- Joker 6003 pedal size 15 with flat mouth to mount and dismount pedals - Particularly suitable for narrow wrenching situations on the bike - The special mouth geometry expands the placement possibilities of the tool - The low return angle in the mouth "takes" the screw every 15° - Slim ring side angled by 15°

- Handle/interchangeable blade system for rapide exchange of the blade - Stubby screwdriver handle with short blade for hard to reach areas. - Suitable for the mounting of bits with 1/4" hexagon drive - Strong permanent magnet, which also holds large and heavy screws. - The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. - Includes 6 bits located in a magazine in the handle - Bits (Torx 15,20,25) (Hex 3,4,5mm)

- Minimalist, lightweight multi-tool option stored at the end of an axle during rides for easy access during quick adjustments and trailside repairs. - On one side of the handle is a 5mm hex end stepped to 6mm - Compatible with Wolf Tooth rear axles that have threaded axle bolt (091000). - Four double sided bits: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible - Two double-sided hex bits can nest on the inside of the handle via magnet

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.